• Manage Widget Libraries…: Widget Libraries Management dialog box allows users to set the library order in ADE and individual library’s visibility.

  

  Users can decide if any library would apprear or be removed.

  In addition, users can drag the libraries around for determining the order that the libraries appear.

• Manage Font: Please refer Manage Font for more details.

In this tab, the following settings are available:

User Interface

• Use Compact Layout: Set ADE to the compact layout format.

ADE

• Start from Primary Monitor: If selected, ADE will launch from the primary screen; otherwise, ADE will launch from the secondary screen.
• Capture Delay: This sets the waiting time for rasterizing the HMI design. If the exported image is not complete or accurate, please set this value above 100.
• Document Template Refreshing Time: This sets the template refreshing delay time. The default value is 1000. If users are using computers of older model for running ADE, it is highly recommended to set this value to be above 2000.

Canvas

• Show Grid: If selected, the grids will be shown on the HMI design canvas and grid size and sytle can be set.
• Sanp Objects to Grid: When widgets are dragged into the HMI design, they are placed and aligned on the grids.
• Snap Objects to Objects: When widgets are dragged into the HMI design, they are aligned with those widgets that have been placed in the HMI design.

Edit

• Cut and Paste at the Same Place: Once selected, during a copy-and-paster operation, ADE will record the coordinates of the widget that are cut or copied. Once the widgets are pasted, the widgets will be placed on the recorded coordinates.
• Enable Undo/Redo: This sets the number of levels that allows “undo”. The maximum level is 99.

Installation and Update

Users can see the following buttons:

• Connected Board Information: This button can gather the information of the board connected via a USB cable to this computer. The gathered information can help verify if the board is connected properly.

Default Document Template

• Reinstall Default Document Templates: Reloading the Ubique Panel product line. This button can be used after ADE is updated to a newer version and ensure that the new document templates are in use.

Firmware Update

• Select Firmware Binary and Update…: Update the firmware in the Ubique Panel’s control board.

  The prerequisite of firmware update:

  • The latest firmware: The firmware might be avaiable along with the lastest version of ADE or can be downloaded from our website.
  • Please connect to the Ubique Panel’s control board with a USB cable.

Update Older Loader

• Select Loader Binary and Update…: Select the loader for the Ubique Panel and update the loader.

  Attention for the Bootloader update requirement:

  • How to receive the updated Bootloader file: Please contactt support@iot-hmi.com.
  • Please connect to the Ubique Panel’s control board with a USB cable.

Sync IOT Ubique Panel’s date/time with those of PC

• Execute: Updating the date/time of the Ubique Panel’s control board with the information from the PC running ADE.

Factory Reset for IOT Ubique Panel

• Execute: Forcing the connected Ubique Panel to reset to the factory settings. This option will clear up all the user’s stored data or images in the Ubique Panel.

 Note: Other thanReintall Default Document Templates, all other functions require a USB connection to the Ubique Panel control board.

On the left hand side, users can decide which pages to export by clicking the check box of each page. If users want to enable the I/O functions, the “io” page must be exported. Keep in mind that all the target pages that are the desination of a page transition must be exported otherwise the HMI design will malfunction.

Output Type

At the top-right conner of the dialog window, there is a pull-down menu that allows users to specify the output type for exporting. ADE supports the following output type:

• Exporting output type:
  1. Export HMI design to Ubique Panel or start the simulator.
  2. Export to a PDF file.
  3. Printing, exporting to a printer.
  4. Exporting to a web page in HTML format to be viewed by a browser.

Template

The second pull-down menu is the exporting template selection. Each output type has one or more output templates. These templates will be explained in details latter.

Options

The third pull-down menu offers option selection. Differet output types have different options. These options will be explained in details latter.

Exporting to Ubique Panel

This exporting option downloads the HMI design from ADE to Ubique Panel.

Connecting to the control board

Please connect the control board of Ubique Panel to the PC running ADE via a USB cable. ADE automatically recgonizes the connected control board. ADE does NOT support downloading to multiple boards simultaneously. Please make sure that your PC only connects to one single Ubique Panel’s control borad. If users would like to make sure that the Ubique Panel control board is connected to the PC propoerly, they can use Settings in System Menu to open up the following dialog box and select Installation and Update tab. Behind Get Board Information button, the connected control board’s information is shown:

If no control board information available or no board connected, the following message is shown:

 Note: If this dialog box is opened before establishing USB connection with the Ubique Panel control board, please click Get Board Information button again for retrieving the board information. Please refer to Settings

Template

Only Ubique Panel template is supported for exporting.

Options

• Destination：
  1. Launch Simulation: If selected, ADE will launch the built-in simulator and export the HMI design to the simulator. Keep in mind that running the built-in simulator does not require the connection to the Ubique Panel control board. The simulator shows up on the screen and users can directly verify their HMI design. However, this built-in simulator can NOT simulate the I/O functions.
  2. Download: If this option is selected and the Ubique Panel control board is connected via a USB cable, then the downloading will commence. The progress and the related messages are shown in “Exporting documents” dialog box. If everything works fine, the number of errors is zero and the dialog box will notify that the downloading is successfuuly done and prompt users to close this dialog box. If the downloading fails, the error messages, displayed in red, shows up in the dialog box for users to review:

     

     If the error number is not zero, the HMI design is not downloaded to the Ubique Panel. Neither does ADE launch the built-in simulator.

  3. Save to File: This function is for technical support. When users runs into issues in using ADE, they can export their HMI to a file by using this option and send the saved file to our technical support team for debugging.

Exporting to PDF

This output type exports the HMI design to a PDF-formated file.

Template：

• Brochure Export Tempate: Export HMI design pages only.
• Default Export Template：Export HMI design pages along with the page note.

Option:

• Image Format：Both scalable/vector and bitmap/rasterized formats are supported for exporting HMI designs. In most cases, images inserted by the users will be exported in the bitmap/rasterized format.
• Page size：Select A3, A4, A5, Letter, Legal and Tabloid format.
• Orientation：Portrait or Landscape.
• Column：Select one or two columns per page.
• Row：Select one or two rows per page.
• Backgroud：Set the background color and opacity for the exported PDF page.
• Margin： Set the margin for the exported PDF page. Three options are available: None, Normal, and Large.
• With Title：Select if the title is needed or not.
• With header/footer：Turn on or off the header and footer.
• With notes：Turn on or off the not.
• Draw borders: Choose if border is drawn on the PDF exported pages.

Before exporting, the file selection dialog box will appear allowing users to set the exported PDF file’s name and directory. If the file name alreay exists, the dialog box will ask if the existed file should be replaced or not. If this file is being viewed by other PDF reader, then it is locked and cannot be replaced. As a result, the exporting will fail. You can solve this problem by closing all the PDF readers that access this file and then re-export the HMI design.

Printing Format

This output type share the same functionality as that of PDF except that this function output the HMI design directly to the printer. Please refer Export PDF.

Web Page

Exporting HMI design to HTML formated web page.

Template:

• Default HTML Template: Exporting HMI design to a signle-paged web pate.
• Clickable Prototype HTML Template：Exporting HMI to a web page with hyper links.

The file selection dialog box appears prior to exporting for allowing users to select the exporting directory. The directory contents will be cleared completely and the exporting file will be written into this directory. After exporting, please click index.html for viewing your HMI design in a web browser.

• New Design from Template: Allowing users to choose a Ubique Panel product to start designing HMI.
• Open: Opening a stored HMI design. Once clicked, an pop-up dialog window will appear allowing users to choose a design file to open. All the ADE designs bear the same file extension name: .epgz. In this pop-up dialog window, only those files with this extension name will be seen.
• Save: Saving HMI designs. If a new design has not been given a name, a file saving dialog window will pops up allowing users to specify the file name.
• Save As…: Saving HMI design to a different file. A dialog window will appears allowing users to specify or select the target file name.
• Export…: Exporting HMI design. Users can export their HMI design RDK for completing an HMI development. In addition, ADE can export the HMI design to a PDF-formated document or a HTML file with hyper links. Please refer to Export
• Print…: Printing HMI design. Please refer Export
• Close: Closing HMI design.
• Recent Designs: Listing the recently opened HMI designs for users to quickly select and open a previous HMI design.
• Settings…: Setting up ADE’s system parameters. Please refer Settings
• Select Language: Selecting the language used in ADE. Currently, users can select English or 繁體中文。
• Tools: Managing widget libraries and fonts. Please refer Tools
• About…: Displaying version, copyright information and the release note.
• Exit: Exiting and closing ADE program.